Electrical Safety Compliance Sydney
Safety & Compliance
Licensed, insured and working to Australian Standards on every site. Here's how Lightspeed Electrical manages work health and safety, and the licences, standards and documents behind every commercial and industrial job we deliver in Sydney.
371504C
— NSW electrical contractor licence
000109918
— Master security licence
Since 2013
— Commercial electrical work in Sydney
The short answer
What does electrical safety compliance mean for a Sydney business?
In NSW, electrical installation work must be done by a licensed electrical contractor, installed to the Wiring Rules (AS/NZS 3000) and certified with a CCEW. On site, it must also be managed safely under the Work Health and Safety Act 2012, with a SWMS in place for high-risk work.
For facility managers, builders and business owners, that means checking a contractor's licence, insurance, safety system and the standards they work to before they start. Here's how Lightspeed covers each one.
✓ Licensed contractor 371504C
✓ SWMS signed before every job
✓ AS/NZS 3000 · 2293 · 3012
✓ CCEW & test results at handover
✓ Documented WHS & return-to-work program
Licences & insurance
Credentials you can check
Every licence below can be verified independently. Ask us for copies when you're onboarding us as a contractor.
— Electrical contractor
NSW Licence 371504C
Licensed NSW electrical contractor. Verify it any time through NSW Fair Trading's online licence check.
— Security systems
Master Security Licence 000109918
Licensed for security-related installations alongside our electrical and data cabling work.
— Insurance
Public liability & workers compensation
Public liability cover of [CONFIRM: amount, e.g. $20 million] plus workers compensation. Certificates of currency available on request.
— Company
ACN 622 957 706
Lightspeed Electrical PTY LTD, delivering commercial and industrial electrical work across Sydney since 2013.
Standards we work to
Three Standards Behind Every Installation
The core Australian Standards our electricians design, install, test and maintain to on commercial and industrial sites.
3000
— AS/NZS 3000 · Wiring Rules
The baseline standard for how electrical installations are designed, installed and verified in Australia. Every circuit, switchboard and fitting we install is built to it.
2293
— AS/NZS 2293 · Emergency & exit lighting
Covers the design, installation and routine inspection and testing of emergency escape lighting and exit signs, so occupants can evacuate safely.
3012
— AS/NZS 3012 · Construction sites
Requirements for temporary electrical installations on construction and demolition sites, from site switchboards to builders' leads.
Our WHS system
How we manage safety on site
Lightspeed operates under the Work Health and Safety Act 2012 with documented WHS policies and procedures that apply to every worker on every job.
01
SWMS before work starts
Safe Work Method Statements are prepared and signed before any project begins, identifying the hazards of the task and the controls in place.
02
Clear accountability
Managers and supervisors are responsible for implementing our safety policies and for their teams following safety protocols every day.
03
Hazard & incident reporting
Hazards, risks and incidents are reported and acted on promptly, including notifying the regulator of notifiable incidents.
04
Training & supervision
Workers receive the information, training, instruction and supervision they need to work safely, and are consulted on safety decisions.
05
Safe systems of work
Safe use, handling and storage of plant, structures and substances, with processes to eliminate or minimise risk wherever practicable.
06
Injury management & return to work
A documented return-to-work program supports early reporting, treatment and a safe return to suitable duties for any injured worker.
Our WH&S Statement
Our Commitment to Workplace Health and Safety
We adhere strictly to Sydney's highest standards for electrical safety. Our compliance with the Work Health and Safety Act 2012 and all relevant Australian Standards (including AS/NZS 3012 for Construction and Demolition Work) underscores our commitment to safe working practices. Our Safe Work Method Statements (SWMS) are meticulously prepared and signed before any project begins to guarantee safety from the start.
01
Commitment to Health and Safety
Lightspeed Electrical is steadfast in its commitment to the health and safety of our workers and all individuals affected by our operations. We enforce and abide by WHS legislation, demonstrating due diligence and implementing best practice strategies and industry-specific WHS policies and procedures.
02
Responsibilities and Accountability
Our managers and supervisors are responsible for the proactive implementation of our safety policies. They maintain accountability for their teams' adherence to safety protocols, ensuring that safety measures are not just followed but integrated into our daily operations.
03
Employee Safety Obligations
All employees are required to take reasonable care for their own safety and that of others. They must comply with all company safety policies and procedures, contributing to a safe working environment.
Safety objectives
Our Goals for a Safe Workplace
We Aim To
Our safety objectives for every worker and every site:
✓
Prevent work-related injuries and illnesses and aspire to an incident-free workplace
✓
Ensure consistency regarding electrical safety regulations
✓
Continuously improve the health and safety skills of our workers
✓
Pursue industry best practice and a safe workplace culture
✓
Provide an emergency response program
✓
Comply with all legislative requirements
How We Achieve These Objectives
These objectives will be achieved by:
✓
Maintaining up-to-date knowledge and understanding of the nature of operations and the associated hazards and risks for the purpose of preventing illness or injury to any person
✓
Provision of processes to eliminate or minimise risks
✓
Promotion of and abidance to electrical safety regulations
✓
Provision of a healthy and safe work environment with appropriate resources, processes and support to enable work to be undertaken in the safest possible way
✓
Provision of safe systems of work, including the safe use, handling and storage of plant, structures and substances
✓
Involving our workers in the decision-making processes through structured and informal communication, consultation and learning
✓
Provision of necessary information, training, instruction or supervision
✓
Provision of adequate facilities for the welfare of workers
✓
Provision of appropriate processes for reporting, receiving and considering information regarding incidents, hazards and risks, and responding in a timely way to that information
✓
Monitoring the health of workers, the effectiveness of systems and workplace conditions
✓
Providing effective injury management and rehabilitation strategies
Policy statement
Injury Management and Return to Work
Lightspeed Electrical is committed to the health, safety and welfare of all persons at our workplace and the timely, safe and durable rehabilitation and return to work for workers who suffer a work-related injury or illness.
Injury Management Involves
✓
Having systems in place so that everyone in the workplace agrees, understands and knows what to do in the event of an injury
✓
Ensuring all employees are aware of current electrical safety regulations
✓
Early reporting of injuries, including notifiable incidents to the regulator
✓
Timely provision of treatment and assistance for return to work
✓
Provision of assistance to treating doctors with regard to suitable duties
✓
Appropriate return to work, because the workplace is the most effective place for a worker to recover
✓
The injured worker, the employer, the insurer and treatment providers working in an effective and coordinated way
✓
Timely payment of weekly benefits and medical expenses
Our Return-To-Work Program
Lightspeed Electrical has developed a return-to-work program to communicate the processes that are in place to ensure effective injury management. The program identifies the:
✓
Commitment of the organisation to rehabilitation and return to work
✓
Rights and responsibilities of injured workers
✓
Procedure for injury management
✓
Workers Compensation Insurer
✓
WorkCover Claims Assistance Service
✓
Workers Compensation Commission
✓
Return-To-Work Coordinator
✓
Rehabilitation Provider
Lightspeed will provide the appropriate support and resources to ensure the objectives of this policy are achieved.
For tenders & onboarding
Safety documents available on request
Onboarding us as a contractor or preparing a tender? Ask for our compliance pack and we'll send through what your prequalification needs.
✓
Electrical contractor and security licence details
✓
Insurance certificates of currency
✓
Job-specific Safe Work Method Statements
✓
WHS policy and injury management statement
✓
CCEW and test results at handover
✓
Emergency and exit lighting records
FAQs
Electrical safety compliance questions
Can't see your question? Call us on 1300 968 551 and we'll walk you through it.
Is Lightspeed Electrical a licensed electrical contractor?
Yes. Lightspeed Electrical PTY LTD holds NSW electrical contractor licence 371504C and Master Security Licence 000109918. You can check our contractor licence through NSW Fair Trading's online licence check.
Do you provide a SWMS for every job?
Yes. A Safe Work Method Statement is prepared and signed before any project begins, and we can supply job-specific SWMS to principal contractors and site managers on request.
What insurance do you carry?
We hold public liability insurance [CONFIRM: cover amount] and workers compensation insurance. Certificates of currency are available on request for tenders and contractor onboarding.
Which Australian Standards do you work to?
Our core standards are AS/NZS 3000 (Wiring Rules), AS/NZS 2293 (emergency and exit lighting) and AS/NZS 3012 (construction and demolition sites).
Will I receive compliance paperwork when the job is finished?
Yes. You'll receive a Certificate of Compliance for Electrical Work (CCEW) as required in NSW, along with test results for the installation.
Need a compliant electrical contractor on site?
Talk to a licensed, insured Sydney commercial electrician about your next project or prequalification.